| Cable Hardware |
| M-91 |
Cable End Pivot, 1/4" × 3/8" × 39/64" |
 |
| M-91-A |
Aluminum Pivot |
| M-3500 |
Quick Release Rod End |
| M-3500-A |
Quick Release Rod End aluminum (not shown) |
| M-3500-B |
Quick Release 1/4" cable end |
| M-3501 |
Quick Release Clamp, 90-degree |
| M-3501-A |
Quick Release Clamp, straight |
| M-3501-S |
Cable Clip, straight |
| M-3502 |
Double Quick Release Clamp |
Cable Tabs & Clamps |
| M-46 |
Control Cable Tab, adjustable, .050" 4130 sheet |
 |
| M-73-A |
Cable Tab, push pull, tall, .090" 4130 sheet, 3/16" hole |
| M-73-B |
Cable Tab, push pull, short, .090" 4130 sheet,
3/16" hole |
| M-73-C |
Cable Tab, extra tall, .090" 4130 sheet, 3/16" hole |
| M-90-A |
Cable Half Clamp, large, 31/64" × 1/2" × 1
3/16" |
| M-90-B |
Cable Half Clamp, small, 3/8" × 13/32" ×
21/32" |
Cable Slot Covers |
|
These NHRA-required reinforcing plates double the thickness of the frame rail to prevent damage to the control cables installed through the tubing. We manufacture five different versions to suit every situation. |
| M-167 |
Frame Slot Cover, long |
 |
| M-167-A |
Frame Slot Cover, short |
| M-167-B |
Frame Slot Cover, small |
| M-167-D |
Frame Slot Cover, short |
| M-167-E |
Frame Slot Cover, long |
Push-Pull Cables |
|
Note: All push pull cables are 3/8" cable diameter, 10-32 threads. Call for availability of other types and sizes.
|
| M-3503 |
3' Push-Pull Cable |
 |
| M-3504 |
4' Push-Pull Cable |
| M-3505 |
5' Push-Pull Cable |
| M-3505-A |
5 1/2' Push-Pull Cable |
| M-3506 |
6' Push-Pull Cable |
| M-3506-A |
6 1/2' Push-Pull Cable |
| M-3507 |
7' Push-Pull Cable |
| M-3507-A |
7 1/2' Push-Pull Cable |
| M-3508 |
8' Push-Pull Cable |
| M-3508-A |
8' Push-Pull Cable |
| M-3509 |
9' Push-Pull Cable |
| M-3509-A |
9 1/2' Push-Pull Cable |
| M-3510 |
10' Push-Pull Cable |
| M-3511 |
11' Push-Pull Cable |
| M-3512 |
12' Push-Pull Cable |
| M-3513 |
13' Push-Pull Cable |
| M-3514 |
14' Push-Pull Cable |
Mini Push Pull Cables |
| M-3552 |
2' Mini Push Pull Cable |
| M-3553 |
3' Mini Push Pull Cable |
| M-3554 |
4' Mini Push Pull Cable |
| M-3555 |
5' Mini Push Pull Cable |
| M-3556 |
6' Mini Push Pull Cable |
| M-3557 |
7' Mini Push Pull Cable |
| M-3558 |
8' Mini Push Pull Cable |
| M-3559 |
9' Mini Push Pull Cable |
| M-3560 |
10' Mini Push Pull Cable |
| M-3525 |
Parachute Cable |
Dzus Buttons |
|
A good supply of Dzus fasteners is indispensible when you are building a race car. These famous quarter-turn fasteners are ideal for securing body panels and "tin." We use dozens of Dzus fasteners on every car we build, so we always have a complete selection of sizes and styles in stock. |
| M-3100 |
Dzus Button, .550" flush mount, steel |
 |
| M-3100-A |
Dzus Button, .550" flush mount, aluminum |
| M-3100-B |
Dzus Button, .550" dome head, steel |
| M-3100-C |
Dzus Button, .550" dome head, aluminum |
| M-3110 |
Dzus Button, self-ejecting, .500" wing style, steel |
| M-3111 |
Dzus Button, self-ejecting, .550" flush mount small, steel |
| M-3112 |
Dzus Button, self ejecting, steel, large Pro Stock style |
| M-3115 |
Dzus wrench |
Dzus Dimple Tool |
|
The fast and easy way to form panels for Dzus fasteners! Simply sandwich the sheetmetal between the male and female dies and tighten the bolt. |
| M-3120 |
Dzus Dimple Tool |
 |
Dzus Washers |
|
Dzus washers prevent damage to body panels and spread out stress to stop cracking. Back-up washers provide extra reinforcement for thin-gauge panels. |
| M-66 |
Dzus Washer, square, .065" aluminum plate |
 |
| M-66-A |
Dzus Washer, round |
| M-66-B |
Dzus Washer, back-up, square or round |
|
|
Dzus Springs & Plates |
| M-3101 |
Dzus Spring, .425", .090" spring steel wire |
 |
| M-3102 |
Dzus Spring, .375", .090" spring steel wire |
| M-3103 |
Dzus Plate, .063" 4130 plate |
| M-3103-A |
Dzus Plate, superlight |
| M-3103-LW |
Dzus Plate, scalloped |
| M-3104 |
Dzus Plate, long |
| M-3106 |
Dzus Plate, angled |
Wire Rope |
|
Wire rope has countless uses in a race car shop; we use it to retain the spoiler spill plates and escape hatches on Funny Cars. To do the job right, always use a special Nico tool to crimp the sleeves securely. |
| M-220 |
Aluminum Clamps, 3/16" |
 |
| M-221 |
Nico Sleeve, 1/16" |
| M-222 |
Wire Rope, 1/16" |
| M-222-A |
Wire Rope, 3/32" |
| M-222-B |
Nico Sleeve, 3/32" |
| M-223 |
Thimble, 1/16" S.S. |
| M-224 |
Wire Rope, 1/8" |
| M-224-A |
Nico Sleeve, 1/8" |
| M-224-B |
Thimble, 1/8" |
| M-3090 |
Nico Sleeve Tool |
Fasteners |
|
Don't trust your race car to no name hardware store fasteners! We know the nuts and bolts of race car construction. Thats why we stock a huge inventory of premium-quality bolts, flat washers, lock washers, steel and aluminum nuts-including unique specialty fasteners. Listed below are some of the most popular sizes and styles. Call McKinney first for race car fasteners! |
- SAE Grade 8 bolts, 1/4", 5/16", 3/8", 7/16", 1/2"
- SAE Airframe Bolts, 10-32, 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2"
- Titanium Bolts
- USS & 12-point bolts, 1/4" and 5/16"
- Flat Washers, AN, SAE, USS, MS and nylon
- Lock Washers, #10, 1/4", 5/16", 3/8", 1/2"
- Steel Nuts, SAE, USS, Nylok, Jam, L.W. Lock and Castle
- Aluminum Nuts, Nylok (thin) , Jam Nuts
|
Rivets |
|
These are the same top-quality rivets we use to build record setting race cars in our own shop. We stock all popular sizes and styles. |
- General purpose blind Rivets
- Dome head rivets
- Countersunk head rivets
- Low-profile rivets
- Button-head hammer rivets
- Countersunk hammer rivets
- Plastic rivets
|
Jam Nuts |
| M-3040 |
3/16" Jam Nut |
 |
| M-3040-L |
3/16" Jam Nut, left-hand |
| M-3041 |
1/4" Jam Nut |
| M-3041-L |
1/4" Jam Nut, left-hand |
| M-3042 |
5/16' Jam Nut |
| M-3042-L |
5/16" Jam Nut, left-hand |
| M-3043 |
3/8" Jam Nut |
| M-3043-L |
3/8" Jam Nut, left-hand |
| M-3043-A |
7/16" Jam Nut |
| M-3043-AL |
7/16" Jam Nut, left-hand |
| M-3044 |
1/2" Jam Nut |
| M-3044-L |
1/2" Jam Nut, left-hand |
| M-3045 |
5/8" Jam Nut |
| M-3045-L |
5/8" Jam Nut, left-hand |
| M-3046 |
3/4" Jam Nut |
| M-3046-L |
3/4" Jam Nut, left-hand |
| M-4257 |
Press Nut, 3/8-24 |
Lock Nuts |
| M-1020 |
8-32 Lock Nut, steel |
| M-1020-A |
8-32 Lock Nut, aluminum |
| M-1025 |
10-32 Lock Nut, steel |
| M-1025-A |
10-32 Lock Nut, aluminum |
| M-1031 |
10-32 Lightweight Lock Nut |
| M-1032 |
1/4-28 Lightweight Lock Nut |
| M-1033 |
5/16-24 Lightweight Lock Nut |
| M-1034 |
3/8-24 Lightweight Lock Nut |
| M-1036 |
7/16-20 Lightweight Lock Nut |
| M-1038 |
1/2-20 Lightweight Lock Nut |
| M-1049 |
1/4-20 Aluminum Lock Nut |
| M-1050 |
1/4-28 Aluminum Lock Nut |
| M-1052 |
5/16-24 Aluminum Lock Nut |
| M-1054 |
3/8-24 Aluminum Lock Nut |
| M-1056 |
1/2-20 Aluminum Lock Nut |
Flat Head Screws |
| M-1008 |
10-32 × 6 Flat Head Screw |
 |
| M-1008-A |
10-32 × 6 Flat Head Screw, aluminum |
| M-1009 |
10-32 × 8 Flat Head Screw |
| M-1009-A |
10-32 × 8 Flat Head Screw, aluminum |
| M-1010 |
10-32 × 10 Flat Head Screw |
| M-1010-A |
10-32 × 10 Flat Head Screw, aluminum |
| M-1012 |
10-32 × 12 Flat Head Screw |
| M-1014 |
10-32 × 14 Flat Head Screw |
Truss Head Screws |
|
You'll discover dozens of uses for these aircraft quality screws, from mounting Funny Car bodies to securing dragster windshields. Safety tip: Never use aluminum fasteners in highly stressed applications such as spoilers. |
| M-1002 |
8-32 × 6 Truss Head Screw |
| M-1002-A |
8-32 × 6 Truss Head Screw, aluminum |
| M-1003 |
8-32 × 8 Truss Head Screw |
| M-1003-A |
8-32 × 8 Truss Head Screw, aluminum |
| M-1004 |
8-32 × 10 Truss Head Screw |
| M-1004-A |
8-32 × 10 Truss Head Screw, aluminum |
| M-1005 |
8-32 × 12 Truss Head Screw |
| M-1015 |
10-32 × 6 Truss Head Screw |
| M-1015-A |
10-32 × 6 Truss Head Screw, aluminum |
| M-1016 |
10-32 × 8 Truss Head Screw |
| M-1016-A |
10-32 × 8 Truss Head Screw, aluminum |
| M-1017 |
10-32 × 10 Truss Head Screw |
| M-1017-A |
10-32 ×10 Truss Head Screw, aluminum |
| M-1018 |
10-32 × 12 Truss Head Screw |
Steel Quick Pins |
Quick pins from McKinney save precious seconds in the pits by making it faster and easier to service your race car! Quick pins can be used in many applications that don't require the clamping force of a bolt.
McKinney quick pins are manufactured from aircraft quality steel; they're the only pins that meet our standards. We buy in volume, so our prices are tough to beat! |
| M-299 |
1/4" × 1/2" Quick Pin |
 |
| M-300 |
1/4" × 1" Quick Pin |
| M-300-A |
1/4" × 1 1/2" Quick Pin |
| M-300-B |
1/4" × 2" Quick Pin |
| M-302 |
5/16" × 1" Quick Pin |
| M-302-A |
5/16" × 1 1/2" Quick Pin |
| M-302-B |
5/16" × 2" Quick Pin |
| M-304 |
3/8" × 1" Quick Pin |
| M-304-A |
3/8" × 1 1/2" Quick Pin |
| M-304-B |
3/8" × 2" Quick Pin |
| M-304-C |
3/8" × 2 1/2" Quick Pin |
| M-304-D |
3/8" × 3" Quick Pin |
| M-304-F |
3/8" × 4" Quick Pin |
| M-305 |
1/2" × 1 1/2" Quick Pin |
| M-305-A |
1/2" × 2" Quick Pin |
| M-199-A |
1/4" × 1" Push Pin |
| M-199-B |
1/4" × 1 1/2" Push pin |
Pins |
| M-113 |
Safety Pin, .047" steel wire |
 |
| M-208 |
Parachute Pin, 1/2" dia. steel |
| M-208-A |
Hair Pin, for parachute pin M-208 |
| M-209 |
#22 Hair Pin |
| M-209-A |
#17 Hair Pin |
| |
|
Rod Ends |
|
McKinney Corp. knows rod ends! The proper selection and use of rod ends is critical in a race car. That's why we specify only high-strength 4130 rod ends for highly stressed applications such as suspensions, steering, and linkages. Standard rod ends are suitable for applications that do not require maximum strength. We stock rod ends with a wide variety of thread sizes and hole diameters; many are available with right-hand or left-hand threads, as well as female threads. McKinney is your one-stop source for specialty rod ends-including hard-to-find titanium and aluminum versions! |
| M-3000 |
3/16" 4130 Rod End |
 |
| M-3001 |
1/4" 4130 Rod End |
| M-3001-A |
3/16" × 1/4" Rod End |
| M-3001-AL |
3/16" × 1/4" Rod End, left-hand |
| M-3001-L |
1/4" Rod End, standard, left-hand |
| M-3002 |
5/16" 4130 Rod End |
| M-3002-L |
5/16" 4130 Rod End, left-hand, 1/4" bore |
| M-3002-LH |
5/16" 4130 Rod End, left-hand |
| M-3002-LHR |
5/16" × 1/4" Rod End, left-hand |
| M-3002-S |
5/16" Rod End, standard |
| M-3002-T |
5/16" 4130 Rod End, Teflon Insert |
| M-3003 |
3/8" 4130 Rod End |
|
| M-3003-AL |
5/16" × 3/8-24 Rod End, aluminum |
| M-3003-B |
3/8" × 5/16" Rod End, right-hand |
| M-3003-BL |
3/8" × 5/16" Rod End, right-hand |
| M-3003-L |
3/8" 4130 Rod End, left-hand |
| M-3003-LT |
3/8" 4130 Rod End, Teflon insert, left-hand |
| M-3003-T |
3/8" 4130 Rod End, Teflon insert |
| M-3003-TI |
3/8" Rod End, titanium |
| M-3004 |
7/16" 4130 Rod End |
| M-3004-A |
7/16" × 3/8" Rod End Standard |
| M-3005 |
1/2" 4130 Rod End |
| M-3005-A |
1/2" 4130 Rod End, blank |
| M-3005-AL |
1/2" Rod End, aluminum |
| M-3006 |
5/8" 4130 Rod End |
| M-3006-T |
5/8" 4130 Rod End, Teflon insert |
| M-3007-L |
3/4" 4130 Rod End, left-hand |
| M-3010 |
3/16" Rod End, standard |
| M-3011 |
3/16" 4130 Rod End, left-hand |
 |
| M-3012 |
5/16" Rod End, standard |
| M-3012-L |
5/16" Rod End, standard, left-hand |
| M-3012-W |
5/16" Rod End Washer |
| M-3013 |
3/8" Rod End, standard |
| M-3015-W |
3/8" Rod End Washer |
| M-3030 |
3/16" 4130 Female Rod End |
| M-3030-A |
3/16" Female Rod End, standard |
| M-3032-A |
1/4" Female Rod End, standard |
| M-3034 |
5/16" 4130 Female Rod End |
| M-3036 |
3/8" 4130 Female Rod End |
Tow Pin |
Murf McKinney designed this heavy-duty tow pin to eliminate the problem of bent and broken tow hooks once and for all.
Manufactured from 5/8" diameter 4130 steel bar, the eye is completely welded to retain the tow strap. The shank's 1/2"-NF threads can be screwed into a receiver in the chassis for towing or lifting the race car. |
| M-245 |
Tow Pin |
 |